How to Insulate Your Garage Door 

If you already have an existing garage door but don’t have insulation in it, you can make a way to insulate it. Adding insulation to the garage door will increase your garage’s thermal comfort, provide barrier against outside noise, reduce your energy bills and infiltrate moisture. Fortunately for you, professionals of Garage Door in Lawrenceville GA provided some DIY approach for insulating your garage door. Just follow the steps below.  

Garage Door

Step 1: Measure the Door Panels 

The first thing to do in this project is measure the panels of the garage door. They are recessed from the latticed frame, they have rectangular shapes. You will install the insulation on the garage door’s inside face. Make sure you measure from the inside.  Determine the dimensions of each panel using a tape measure. Just determine the dimensions; you don’t have to be too exact at this point. You will need the measurement to know how much insulation you should buy.  

Step 2: Buy the Insulation 

Once you’re done with the measurement, you can now purchase the insulation. There are 2 kinds you can choose from which are well suited for garage doors. The first one is the reflective foil insulation. It is usually 12.5 mm thick consisting of polyethylene foam which can be found between the aluminum foil. It is sold in foils, and bringing them is not a burden because it is flexible. But before buying, test how the insulation works in cold and hot weather.  

Another type of insulation is polystyrene foam. This type is sold in large sheets. This insulation is difficult to work with because of its rigidity but it provides more insulation than the reflective foil insulation. If you want to pursue this, purchase the highest R-value you can find. Do not consider spray-in insulation and fiberglass batt insulation because they don’t suit the garage doors.  

Step 3: Cut the Insulation 

Once you’ve brought the insulation home, start measuring out the dimensions of the garage door panel. Use a straightedge to do this. Mark the dimensions using a pen. Use a utility knife to cut the insulation to size. Make the sides larger so if there’s an excess you will just trim it off.  

Step 4: Fit the Insulation to the Panel 

Place the cut insulation against the door panel. If the garage door has a metal frame, tuck the insulation into the frame. If you can’t do this, just align pieces of insulation into each recessed panel. If there’s any excess, trim them.  

Step 5: Affix the Insulation 

Tape the piece of the insulation to the door’s face suing an aluminum foil tape. If you successfully tucked the insulation into the frame, skip this. If you don’t have aluminum foil tape, use double-sided tape. Affix the tape to the panel, and then press the insulation. Repeat until all the panels are insulated.  

Step 6: Buy Insulation Kit as Alternative 

If you want to speed the process, you can buy insulation kits at the hardware store. The insulation is ready to be cut. The process of installation is similar to what we wrote here.  


Several Tips on How to Give Special Care to Your New Permanent Tattoo

Now you got your new tattoo and then what? This article will educate you on how to take good care of your newly done tattoo. There are several aftercare products and recommendations. Some deliver and some do not. But the most significant thing in all of the recommendations is to listen to the tattoo artist. Your tattoo artist will recommend you exactly on what you should do right after the session, all based on the outcomes that they have already witnessed over several years of doing this job. The broad majority of tattoo healing issues are due to the fact that the customers or the clients fail to follow some few guidelines. As a matter of fact, these instructions you are given are very significant.

Permanent Tattoo

Thus, the following below are the most common skin care and they are very fundamental, time-tested recommendations. If any point varies from what you’re instructed, just obey the recommendation of your tattoo artist. In addition to that, you should remember that people may have various kinds of skin, potential reactions, allergies and more. Therefore, everyone will actually heal in a different manner.

Tips on How to Properly Do Tattoo Aftercare

  • Listen carefully to what your tattoo artist will tell you and do exactly what she or he instructs. If he or she is a professional and reputable with years of experience, they will basically know what healing techniques and skin products work best for their own art, and their customers in particular. Always remember, if you change few of the steps for whatever your reasons may be, the tattoo artist will not be liable to retouch the tattoo for free. Hence, it will be already your responsibility to take good care of your new tattoo at the time you leave the tattoo shop.
  • Do not cover your new tattoo again unless it is highly recommended by your tattoo artist. It is extremely significant to maintain your new tattoo clean at all times right after the wrap has been taken off. Always keep in mind that your new tattoo will be considered as an open wound. Most of the tattoo artists recommend washing the tattoo area thoroughly, yet gently with antibacterial and an unscented soap. Gently pat it dry using a clean paper towel or allow it to air dry. Always keep the new tattoo clean. Everything you touch or use should be clean. You do not want cat or dog hairs to land on your new tattoo.
  • it’s very common that your new tattoo will be slightly inflamed, reddish, and sensitive. Some people experience skin irritations a day or so right after getting new tattoo (it may vary depending on the amount of work, size and placement in the tattoo). If these complications continue longer than three or four days, you should inform your tattoo artist about this so that you can set up a schedule to visit their studio in order for them to witness it and advise you particularly on what to do. To know more about getting a tattoo and aftercare, visit

Selection of the Best Plumber  

There are many professional plumbers out there. For any plumbing concerns, you should only call for professionals but the question now is which professional plumber should you hire to fix your problem regarding your plumbing system? 

There are certain standards that you should have so that you will sure that you have hired someone that is capable of doing it and has a very good attitude towards work. Having a license is not an assurance that you have hired the right person because there are professional plumbers who are not very good at what they do.  

In order for you to select the best one, we have derived a checklist that you should follow if you want to have the best plumber near your location or area. Follow our list and we are sure that you are going to end up being happy at what you did. Don’t follow it and you will surely regret your decision of taking this list for granted.  

First and foremost, you could call your friends or your family members and ask for referrals. Maybe they have had a situation in the past that needed a plumber to fix their problem and they could give you the name and the contact details of that plumber because it is better to have someone attest to the performance of the plumber. This would have lesser effort from your end since you are going to be sure that that particular plumber is very good at what he or she does.  

But, at the moment where they could not give you a list of names of plumbers that they trust then you will need this checklist: 

THE PLUMBER SHOULD BE A GOOD COMMUNICATOR AS WELL. If the plumber is capable of answering your questions and requests then this is a good sign that he or she is a good plumber. If you have a plumber make sure that he or she will converse with you because this is very important since you are the client and you are hiring him as the plumber who will fix your problems regarding your plumbing system.  

OCULAR VISIT. A good plumber will only give you an estimate once he has seen the condition of your plumbing system. He or she could not give you an estimate if he has not seen the whole of it because if he completes an ocular visit, that means that he already knows the parts that he is going to need and how much work would it need in order to fix it.  

PATIENT. He should also be patient. He should be patient with you as the client and he should be providing you with everything that you would want to know during your inquiry. He should be happy letting you know that he will be able to fix the problem given that you will be paying for it.  

Before this article ends, we should remind you to not settle for anything less because you deserve so much better and you should only go for those professional plumbers like those from plumbing services Wilmington de or other companies.